Sign In | Join Free | My
Guangzhou Pinbang Building lndustrial co.,LTD
Guangzhou Pinbang Building Material Industrial Co.,Ltd. Your directly manufacturer and exporter for Ceramic Tile Adhesive !
Home > Outdoor Tile Adhesive >

Waterproof Outdoor Tile Adhesive , Dual Purpose for Wall and Floor

Waterproof Outdoor Tile Adhesive , Dual Purpose for Wall and Floor

Place of Origin : Guangzhou, China
Brand Name : Pinbang
Certification : ISO9001:2000
Model Number : PB
MOQ : 100bags
Price : Negotiable
Packaging Details : Composite Paper Bag W/. Plastic Inside, 20kg/bag
Delivery Time : 10 working days
Payment Terms : T/T
Supply Ability : 1000 tons/month
Product name : Outdoor Tile Adhesive
Application : floor and wall / interior / exterior
Features : water resistant / Non-toxic / Eco Friendly / Eco Friendly
Appearance : White / gray power
Stone Adhesive : high-strenge adhesive
Main Raw Material : polymer
Contact Now

Waterproof Outdoor Tile Adhesive , Dual Purpose for Wall and Floor


1, Easy to use.
2, Good workability.
3, Excellent bond strength.
4, Dual purpose for walls and floors.

Product Description:

Pinbang Waterproof Outdoor Tile Adhesive is a premium quality cementitious powder to be mixed with either water or latex admixtures for installing ceramic tile and nature stone using the thin-bed method of installation. It is suitable to be used on concrete, cement plaster, cement mortar, concrete masonry etc.

Technical Data:

Inspection Items

Standard Requirement (C1T)

Inspection Results

Individual Result

Drying time, 20min Tensile Adhesive Strength/Mpa




The Original Tensile Adhesive Strength/MPa




Tensile Adhesive Strength after Soaking/Mpa




Tensile Adhesive Strength after Thermal Ageing




Tensile Adhesive Strength after Freeze-thaw Cycling/Mpa





Easy to use, no pre-soaking of tiles, good workability, long open time, excellent bond strength, excellent non-sag formula for wall application, dual purpose for walls and floors.

Surface Preparation:

1, Remove all deteriorated concrete, dirt, oil, grease and other bond inhibiting materials from the surface. Cleaning should be done by sandblasting, high pressure water blasting, scrabbling or other appropriate mechanical means.

2, Substrate should be saturated surface dry and free of surplus water prior to application.

3, New concrete slabs should be damp cured and 28 days old before application.

4, Newly plaster walls should be 14 days old before application.

Mixing Procedure:

1, Place clean, potable water into a clean container. Add pre-mixed thinset mortar powder gradually to the measured quantity of water. The mix ratio is depending on the type of thinset mortar.

2, Mix with a slow speed electric drill mixer until a smooth, uniform, homogeneous mortar consistency is achieved. Allow the mix to stand for 3~5 minutes for additive to dissolve.

3, Re-adjust consistency if necessary, re-mix for 1~2 minutes, and apply with the proper sized notched trowel.


1, The receiving substrate should be damp, free from surplus water.

2, Apply thinset mortar to the substrate with the flat side of the trowel, pressing firmly to work into surface. Comb on additional thinset mortar with the notched side. Note: use the proper sized notched trowel to ensure full bedding of the tile.

3, Spread the thinset mortar evenly over the surface and firmly place the tiles into the wet thinset mortar before any premature drying occurs. It is best to be done within 20 minutes. Double spreading of the thinset mortar may be required for large format tiles.

4, Ensure complete tile bedding is achieved by intermittent checking of placed tiles.


1, Allow 24 hours for thinset mortar set hard before applying tile grout.

2, The wet thinset mortar should be used within the pot life approximate 2 hours.

3, Once the thinset mortar is dried, it should be discarded and never add water and reuse again.


Pinbang Waterproof Outdoor Tile Adhesive cannot be directly applied on wooden substrate. For further information, please feel free to contact us.


1 year shelf life if factory packed, sealed pallets and stored off the ground in a dry area.


Silica sand and cement materials are used and breathing in of content should be avoided. Observe usual precaution to protect eyes and skin while handling dry cement-based powder mortar.



Product Tags:

waterproof wall tile adhesive


floor and wall tile adhesive

China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

Waterproof Outdoor Tile Adhesive , Dual Purpose for Wall and Floor Images

Inquiry Cart 0
Send your message to this supplier
To: Guangzhou Pinbang Building lndustrial co.,LTD
Characters Remaining: (0/3000)